This guy turned his truck into a cool camping van that is perfect for long distance travel.
"Started with 1/16 x 1x1 square tube and welded a frame"
"Added 2x4 framing to carry the plywood exterior and interior"
"3/8 plywood screwed to framing; cut with a flush-cut bit on a router"
"A look at the inside; the big piece of steel is 1/8 thick instead of 1/16 because it will have the hinges welded on for the door"
"Here are the beginnings of the door as well as the first coat of waterproof silicone paint-50 year warranty!"
"Electrical box-same idea here as the framing-take pictures so you can see where everything is after the finish panels are installed"
"Base layer 1/4 inch plywood is installed on the walls; you can see the aromatic cedar panels on the ceiling-the whole interior is finished in this expensive but awesome product"
"Just about done-now to install on the truck and spend 200 hours messing around with the electric systems"
"The electric panel is located between the two larger cabinets. it also doubles as a night stand"