1
1.
Greta 3 days ago
#39
Had it sitting right next to the chlorine storage did we?
Had it sitting right next to the chlorine storage did we?
2
2.
Nibby 3 days ago
#24 looks like a cross cable and a lot of switches recognize this. that cable is probs not your problem.
I've seen worse though. An electrician who put the strands in at random. Still the cable, kinda, worked. Lots of packet loss, but nothing the user noticed:)
I've seen worse though. An electrician who put the strands in at random. Still the cable, kinda, worked. Lots of packet loss, but nothing the user noticed:)
1
3.
Rudy 3 days ago
Nibby,
Yeah, you're right. Beeing a cross-over cables means its probably pretty old though, maybe CAT 3, which would mean 16MBit/s maximum and unshielded at that.
So changing it probably fixed his problem for the wrong reason
Yeah, you're right. Beeing a cross-over cables means its probably pretty old though, maybe CAT 3, which would mean 16MBit/s maximum and unshielded at that.
So changing it probably fixed his problem for the wrong reason
1
4.
Nibby 2 days ago
Rudy,
no, it's cat 5 alright. but 100mbit. if brown and green were switched it would be a swap cable supporting gigabit.
plus: this connector is shielded. But a widely made mistake is to use shielded and connect it on both sides, causing current-loops and sh!t.
no, it's cat 5 alright. but 100mbit. if brown and green were switched it would be a swap cable supporting gigabit.
plus: this connector is shielded. But a widely made mistake is to use shielded and connect it on both sides, causing current-loops and sh!t.
2
5.
Nibby 3 days ago
#25 that is impressive!
0
6.
Nibby 3 days ago
#16 #37 #48 So much important work and no backup. Please people. If it's important store it on a redundant device and make backups!
1
7.
Cornelia 3 days ago
#37 Data can be recovered with easy, if you have an identical one (search on ebay), and just replace the electronic board... Maybe 4 - 6 screws... 
Had it sitting right next to the chlorine storage did we?
I've seen worse though. An electrician who put the strands in at random. Still the cable, kinda, worked. Lots of packet loss, but nothing the user noticed:)
Yeah, you're right. Beeing a cross-over cables means its probably pretty old though, maybe CAT 3, which would mean 16MBit/s maximum and unshielded at that.
So changing it probably fixed his problem for the wrong reason
no, it's cat 5 alright. but 100mbit. if brown and green were switched it would be a swap cable supporting gigabit.
plus: this connector is shielded. But a widely made mistake is to use shielded and connect it on both sides, causing current-loops and sh!t.